Sea-Lect Designs | Sea-Dog

This kit comes with everything that you need to add an additional deck bungee to any kayak. Just set your pattern, drill your holes and tie your knots and you are ready to go. Specs Parts...

Fits all Sea-Lect Designs Kayak Adjustable Footbraces w/ Rudder Control. The adjuster is great for fine tuning cable, and is available in thru-hull mount or stud mount versions...

The Sealect Designs 3.5 inch Zig-Zag Cleat Kit contains the cleat and mounting hardware to install it. The cleat is made of Injection molded nylon. Simply weave rope around cleat arms, no knots...

You’ve heard of our Zig-Zag Cleat; now be impressed by our new, simplified Zig Cleat! Designed for easy one-handed adjustability, this fastening point features enough holding power for anchor...

Polypropylene two pole deck mount rod holder, includes holder for both a knife and pliers.  Intended to stow rods vertically.  Works great when mounted on the lip of a gear/ tackle crate...

The Locking Bungee Hook w/ Sleeve allows you to cap your 1/4" bungee with a nylon hook and tongue. Offering better security than the Open Bungee Hook. 

The Open Bungee Hook w/ Sleeve allows you to cap your 1/4" bungee with a nylon hook for quick and easy clip-in-and-out of an eyelet.

Great as a replacement for lost or damaged lids, or as a new addition to your boat, Sea-Lect Designs Hatches are manufactured in the USA using the highest-quality Injection Molded Polymer...

Package contains 2 Pad Eyes High strength stainless steel.  Requires 2 #8 Oval Head fasteners (not included) Sea-Lect Designs Number: K081200-1

Gudgeon needed to mount our Trucourse™ Rudder to most kayaks without an existing mounting bracket, and a flat stern. Made with 304 Stamped Stainless...

Gudgeon needed to mount the Sealect Designs Trucourse™ Rudder to most kayaks without an existing mounting bracket, and a pointed stern. Made with 304 Stamped Stainless...

SEA-LECT Designs is hooked into the growing market of kayak anglers, with components and hardware that transform your kayak into a fishing machine. The 30 degree closed end Rod Holder includes...

Replacement Plug Only - NO BASE - 2 Per Package K520021-1 Replacement Plug for K520030 Base     A B C K520030-1 1" 11/16" 1-11/16"    

When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. Stud Mount Kit includes 4 studs 4 clamps 4...

DOME HEAD TRI-FOLD RIVETS, 3/16" BLACK Aluminum Display A (Hole Dia.) Grip Range K799555BK-1 3/16" 1/32"-1/2" Include: (10) Tri-Fold nRivets

Our Kayak Adjustable Footbrace w/ Rudder Control offers the same great benefits as its fixed counterpart ... but you guessed it, withthe added benefit of rudder control capabilities. One of the...

One piece injection molded nylon paddle clip allows for the simple one handed storage of your paddle, anti snag ramps prevent line getting stuck under the clip when not in use, and leash attachment...

Stainless Steel Display Size / Thread Head K936105-1 #8 Oval (OH) K936205-1 #10 Oval (OH) Include: (6) Tapping Screws.

FENDER WASHER PACKS 18-8 Stainless Steel   Display A B (Size) C K939502-1 1/32" #10 1" Include: (6) Fender Washers.

SCREW-OUT DECK PLATE W/ INTERNAL COLLAR The SEA-LECT Designs Screw Out Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. Use...

Having a hard time accessing the inside of your hull on your kayak? Use Well Nuts! Drill a slightly larger hole and insert the well nut with the flange on the outside of the kayak. As you tighten...

Injection Molded Polypropylene Fiberglass/Nylon The SEA-LECT Designs™ Kayak Adjustable Footbrace has 10" of adjustable travel with only the flip of the lever. The two mounting holes (measuring...

FASTENER PACKS 18-8 Stainless Steel Include: (6) Machine Screws, (6) Nyloc Nuts & (6) Flat Washers.

Bulk Display A B K737290 K737290-1 1" 7/16"  

Add a drain plug to your boat without needing fasteners. Sealect designed the flange to fit securely in a 1" hole with no additional hardware needed. The ridges on the body of the drain plug are...

Package of 6 Injection Molded Polypropylene Display A B C D Fastener Weight K736537-1 3/4" 1/2" 3/8" 7/16" #10 OH .01  

Package of 6 Bulk Display A B Fastener K736530 K736530-1 1-1/2" 3/8" #10 OH  

Bulk Display A B C Line Size Color Fastener K002090 K002090-1 2-7/8" 2-1/8" 3/4" 5/32"-5/16" Black #8 OH  

  Bulk Display Description K325160CAP K325160CAP-1 Injection Molded Rod Holder Cap & Gasket for K32516X Series

Bulk Display A B C Bungee Size K653161 K653161-1 1-1/4" 1/2" 3/16" 1/4"   Made by Sealect Designs.

Bulk Display A B C D E Fastener K736462 K736462-1 11-1/2" 10" 5" 1" 5-10" #10 PH  

Add a drain plug to your boat with the Sealect Drain Plug with Flange (# K520015). This combo is designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more...