Description
Description
Methyl Ethyl Ketone Peroxide is an organic peroxide needed to initiate the cure of polyester resins and gelcoats.
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.
| Catalyst Size | Resin Size |
| 15ml | 1 Liter |
| 60ml | 4 Liter |
| 250ml | up to 5 Gallon |
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
|---|---|---|---|---|
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | --- |
| 15 ml per litre or 15 drops per oz. | --- | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | --- | --- | 40 min. | 2 hr. |
