Description
The Harmony 30 inch 3D End Float Bag in vinyl is designed for use in tandem canoes WITHOUT built-in end tanks. It features the innovative 3D vertical end seam along with tie-in points at the nose and three across the base of the bag, all of which are isolated from the air holding cell so that a tear out (a rare occasion at best) will be limited to the anchor. Also features a twist valve on the inflation hose and a high-capacity dump valve.
Inflated Dimensions: 28 x 33 inches.
Features:
| Length: | 2 ft 4 in / 0.71 m |
| Height: | 33 in / 83.82 cm |
| Weight: | 20 oz / 566.99 g |
| Material: | Vinyl |
1 Review
-
Canoe floatation bag
Installed the float bag in the stern (tied it in) and then partially inflated it. Unfortunately it had a small hole along one of the fold lines so it deflated! Even more unfortunate was the fact I didn't realize it until I went paddling on the San Juan several weeks later and fully inflated it, only to have it deflate. Yikes! I will now try to resolve the issue with Western Canoeing.
