Sailing

Fits all Hobie USA boats except for Miracle 20. Also the standard drain plug on Hobie kayaks.  Plugs include plastic gaskets which form a water tight seal in the hull. Use to replace a lost drain plug and keep a few spares with you so you never …

DOME HEAD TRI-FOLD RIVETS, 3/16" BLACK Aluminum Display A (Hole Dia.) Grip Range K799555BK-1 3/16" 1/32"-1/2" Include: (10) Tri-Fold nRivets

Teflon Mast Pivot Bearings for replacement on Hobie 14, 16 and older Waves.  Reduces friction for easier mast rotation and prevents metal contact.  The Teflon pieces are flat but will conform to the mast base shape after first use. Hobie P…

Bulk Display A B C Bungee Size K653161 K653161-1 1-1/4" 1/2" 3/16" 1/4"   Made by Sealect Designs.

This is the ultimate for easy operation of a Hobie Mirage sail kit. Start with the sail rolled around the mast. When you are ready... un-furl to expose the sail or leave a little rolled on the mast to test the wind! By partially unrolling the sail, y…

      Display A B C Line Size Color Fastener K002130-1 2-3/4" 1-15/16’" 13/16" 1/16"-3/16" Black #8 OH     Display A B C Line Size Color Fastener K002140-1 2-3/4" 1-15/16’" 13/16" 1/16"-3/16" Blac…

The Hobie Pro Angler Steering Handle is the replacement handle for the steering control on the Hobie Pro Angler kayaks on either the left or the right sides. This handle is not designed for the up/down rudder control.  Hobie #88991301

FASTENER PACKS 18-8 Stainless Steel Include: (6) Machine Screws, (6) Nyloc Nuts & (6) Flat Washers.

Bulk Display A (Wire Dia.) B C D Sheave K092100 K092100-1 1/4" 1" 1-13/16" 1/2" Plastic  

The mast head wind vane will help you keep your Island on the best angle to the wind for better sailing. Helps you understand shifts in wind direction so you can adjust course or sail settings. Achieve the most performance and optimal course. Up on t…

Hobie Stainless Steel Rudder Pin for H14 and H16.  Sold per each pin as singles. Hobie #20880011

Are you plagued by sloppy rudders? Do your nyliners keep slipping out? Open up the holes in your rudder castings to 7/16″ and install these insulating, self lubricating nylon bushings. Hobie #8062001

Having a hard time accessing the inside of your hull on your kayak? Use Well Nuts! Drill a slightly larger hole and insert the well nut with the flange on the outside of the kayak. As you tighten the hardware the nyloc nut pulls the rubber gasket …

Secure Sailing: Clamcleat Junior Black | Western Canoe Kayak Enhance your sailing adventures with the Clamcleat Junior Black. This reliable piece of nautical equipment ensures a secure fastening for ropes, significantly boosting the efficiency of you…

The Hobie Hiking Stick for Adventure Island and Tandem Island allows you to steer the boat from the trampolines on the kayak. Use the stick on windier days when you are able to hike out onto the trampolines. Fits all 2011 and newer Adventure and…

Keeps the furling line from getting stuck on the bearing plate. Guides the line up onto the drum when you pull on the furling line. This is standard with all new Islands. Hobie Part # 79512101

Standard Aluminum Rudder Pin for H14 and H16 Hobie #20880001

Easy to install shockcord snap hook. No tools required. Reusable! 1/4″ hook. *Shockcord sold separately* Hobie Part #2101 Easy to install shockcord snap hook No tools required Add a shockcord fastener (Hobie Cat # 2102) to secure the h…

Protect hands and feet by covering up sharp edges with these soft vinyl molded adjuster covers.  Also great for keeping clevis pin rings from getting snagged and working out of the pin.  Sold in Pairs. Hobie Part #3261B

FENDER WASHER PACKS 18-8 Stainless Steel   Display A B (Size) C K939502-1 1/32" #10 1" Include: (6) Fender Washers.