Canoe Gear

The Harmony 60 inch 3D End Float Bag in nylon is ideal for solo paddlers in tandem boats. It features the innovative 3D vertical end seam along with tie-in points at the nose and three across the base of the bag, all of which are isolated from the ai…

The Harmony 60 inch 3D End Float Bag in nylon is ideal for solo paddlers in tandem boats. It features the innovative 3D vertical end seam along with tie-in points at the nose and three across the base of the bag, all of which are isolated from the ai…

The Harmony Short Float Stern bag in vinyl is a single replacement bag for the stern of 8 ft -10 ft kayaks. These bags are designed to be used as a set to accommodate center walls and a second bag is required to achieve proper floatation. The listed.…

The Harmony Medium Rec Bag in vinyl fits many moderate-sized recreational kayak sterns like the Wilderness Systems Pungo.Inflatable Dimensions:Size: 35" x 28" InflatedWeight: 19 oz • Tie-ins are isolated from the air holding cell so that a…

The Harmony Small Rec bag in vinyl is a versatile performer. This triangular bag works well for both the bow and stern of many small recreational kayaks. It also works well for the sterns of Eskimo and Prijon whitewater kayaks made without center pil…

The Harmony Short Float Bags in vinyl are designed to fit kayaks 8 ft -10 ft in length. Most have room for and can definitely benefit from both bow and stern bags. Set up as split bags to accommodate center walls. Includes two stern and two bow bags.…

Designed to meet the needs of serious kayak anglers as well as recreational paddlers, the VISICarbon Pro sports unprecedented performance in light weight, low drag, and portability with plenty of style. The ultra thin mast and instantly recognizable …

DOME HEAD TRI-FOLD RIVETS, 3/16" BLACK Aluminum Display A (Hole Dia.) Grip Range K799555BK-1 3/16" 1/32"-1/2" Include: (10) Tri-Fold nRivets

Stainless Steel DisplaySize / ThreadHead K936105-1 #8 Oval (OH) K936205-1 #10 Oval (OH) Include: (6) Tapping Screws.

FENDER WASHER PACKS 18-8 Stainless Steel   Display A B (Size) C K939502-1 1/32" #10 1" Include: (6) Fender Washers.

Having a hard time accessing the inside of your hull on your kayak? Use Well Nuts! Drill a slightly larger hole and insert the well nut with the flange on the outside of the kayak. As you tighten the hardware the nyloc nut pulls the rubber gasket …

Enjoy Secure Canoe Journeys Experience canoeing like never before with our Wedge Thigh Pads. These essential canoe accessories come in a set of two, offering improved comfort and stability during your paddle adventures. Made from high-quality materia…

It's easy to outfit your canoe or kayak with Minicell closed cell foam. It's light, easy to cut, shape and glue. Sold individually. Sold by the Square Foot. Pre-Cut Sections available for online purchase in: 1 Sq Ft - 12" x 12" x 3" 2 Sq Ft - 1…

Knee Pads: Essential Canoe Gear Enhance your canoeing experience with our Knee Pads Canoe Pair with Adhesive. These knee pads not only ensure comfort during long hours of paddling but also protect your knees from potential bumps and scrapes. Made fro…

Complete with nuts, bolts and washers. For use with wood seats only. Hangs from wood gunnels. One set of 4 required per seat. Wood dowels are 4" long

Plastic covers for your aluminum gunnels.  Use this product to protect the aluminum trim from abuse.  Great if your sliding your boat on and off roof racks, doing canoe over canoe rescue's or any river paddling.  Fits over all Clipper.…

Complete with fiberglass hanger (hanger not cut), nuts and bolts-ready for installation. The canoe kneeling thwart (cedar), which is standard in the Clipper Tripper S, provides the paddler with an effective way to transform the tandem canoe into a mo…

Varnished wooden center thwart for canoes, 36" length. Please note - thwart is longer than most canoes will need.Ends of the thwart will need to be cut to fit WCK yoke hardware. * Hardware not included

Varnished ash hand thwarts for the bow or stern of the canoe. Please note - thwart is longer than most canoes will need.Ends of the thwart will need to be cut to fit WCK yoke hardware. * Hardware not included

Its never a bad idea to have a few extra pins for your Canoe Footbrace or Expedition Canoe Cart.  Pins are sold individually.