Hobie Parts & Accessories

QUICKLY INSTALL YOUR LARGER LOWRANCE FISHFINDER THAT MOUNTS VIA A BRACKET. Kayak fishing is all about adaptability. Create your custom setup with a variety of accessory bases from RAM Mounts. The Hobie RAM Lowrance Base Fish Finder Mount with 1.5-in…

Having a hard time accessing the inside of your hull on your kayak? Use Well Nuts! Drill a slightly larger hole and insert the well nut with the flange on the outside of the kayak. As you tighten the hardware the nyloc nut pulls the rubber gasket …

The Hobie H-Rail Cup Holder attachment keeps your drink safe and secure on the Hobie H-Rail. The cup holder has a small piece inside so it will hold small bottles and cans up to a large Nalgene bottle. It clamps to the 12-sided H-Rail without any...

The Trax “2” Cart has 24 cm (blow-molded polyurethane) pneumatic tires. These tires have a high capacity and are very durable! Welded Stainless steel frame. Wheels are easily removable for storage. (176 lb Capacity) This is an all around …

Fits into Hobie’s molded-in rod holders and fastens to the boat using 2 straps and padeyes (included). Release the lever to adjust the angle of the rod holder. Allows you to adjust the angle of their rod so it is best suited for the fishing...

Secure Sailing: Clamcleat Junior Black | Western Canoe Kayak Enhance your sailing adventures with the Clamcleat Junior Black. This reliable piece of nautical equipment ensures a secure fastening for ropes, significantly boosting the efficiency of you…

The Hobie Mirage Shock Cord End Screw allows you to replace any broken shock cord ends or change out cleats and/or padeyes for shockcord ends on your Hobie kayak. Features:  • Universal screw size for newer model mirage...

These fit right into the molded-in rod holders and offer a larger diameter sleeve that is deeper. Keep your fishing rods secure and reels higher out of the water. Leash the holder extension to the boat and the rod to the holder using the molded eyes.…

The Hobie Tandem Island and (2011+) Adventure Island Rudder cover will protect the rudder from chips, dings, and UV damage while storing and transporting. This rudder cover will work in conjunction the Tandem Island custom cover (Hobie part# 72059) a…

Standard Aluminum Rudder Pin for H14 and H16 Hobie #20880001

Version 2 Replacement Shifter Set Right/Reverse for MirageDrive 180.   Hobie Part# 81491021

FENDER WASHER PACKS 18-8 Stainless Steel   Display A B (Size) C K939502-1 1/32" #10 1" Include: (6) Fender Washers.

Whether it is a hand made work of art, or the latest and greatest in sleek, high performance engineering, protect your boat with Danuu's Kayak Cover.   Features: Constructed from UV and water-resistant, 100% polyester ripstop, this kayak.…

Replacement Caliper Handle for Hobie Mirage Eclipse ACX and Dura series. Also recommended with purchase of this product is an Eclipse Caliper Spring (Part# 98100045)   Hobie Part# 98100042

Keeps the furling line from getting stuck on the bearing plate. Guides the line up onto the drum when you pull on the furling line. This is standard with all new Islands. Hobie Part # 79512101

The Hobie Mirage Cassette Plug is used to fill mirage drive opening when the Mirage Drive is not in use. The plug is not intended to completely seal the opening, only to stop splashes and any gear from falling through the opening when the Mirage Driv…

Replacement pedal strap for the Hobie Mirage Drive. Solid individually. Select the strap for either the left or right pedal.   Hobie Part Number: Right - 81226001 UPCs: Right - 0792176230403  

The Hobie Vertical Rectangular Hatch is stiff and strong as designed for standing on. Unique Hobie designed seal and flange lip drainage keeps water out. The kit includes the Hatch, gasket, backing ring, screws and instructions   Hobie...

Easy to install shockcord snap hook. No tools required. Reusable! 1/4″ hook. *Shockcord sold separately* Hobie Part #2101 Easy to install shockcord snap hook No tools required Add a shockcord fastener (Hobie Cat # 2102) to secure the h…

Protect hands and feet by covering up sharp edges with these soft vinyl molded adjuster covers.  Also great for keeping clevis pin rings from getting snagged and working out of the pin.  Sold in Pairs. Hobie Part #3261B